霍爾傳感器
您現在的位置:首頁 > 產品世界 > 電量隔離變送器/傳感器 > 霍爾傳感器
LFB-D51 閉環電流傳感器
產品分類:霍爾傳感器
產品說明:LFB-D51系列閉環電流傳感器的初、次級之間是絕緣的,具有超強抗干擾能力;用于測量直流、交流和脈動電流。 LFB-D51 series curre...
全國咨詢熱線:
400-6618-389
- 功能特性
- 性能指標
- 型號說明
- 外形結構
- 接線與應用
LFB-D51系列閉環電流傳感器的初、次級之間是絕緣的,具有超強抗干擾能力;用于測量直流、交流和脈動電流。
LFB-D51 series current sensor is closed loop device based on the measuring principle of the hall effect,with a galvanic isolation between primary and secondary circuit. It has strong anti-jamming ability and provides accurate electronic measurement of DC, AC or pulsed currents.
電參數 Electrical data(Ta=25℃±5℃, RL=10KΩ, CL=10nF) |
型號 Type
參數 |
LFB6D51 |
LFB10D51 |
LFB15D51 |
LFB20D51 |
LFB25D51 |
LFB30D51 |
LFB40D51 |
LFB50D51 |
單位 Unit |
額定輸入電流(Ipn) Rated input (Ipn) |
6 |
10 |
15 |
20 |
25 |
30 |
40 |
50 |
A |
測量電流范圍(Ip) Measuring range(Ip) |
±15 |
±25 |
±37.5 |
±50 |
±62.5 |
±75 |
±100 |
±125 |
A |
匝 比 (Np/Ns) Turns ratio(Np/Ns) |
1:1200 |
1:1000 |
1:1125 |
1:1000 |
1:1250 |
1:1125 |
1:1000 |
1:1000 |
T |
內接取樣電阻 |
40.0 |
20.0 |
15.0 |
10.0 |
10.0 |
7.5 |
5.0 |
4.0 |
Ω |
額定輸出電壓 Rated output |
@ Ip=±Ipn±0.8±0.5% |
V |
|||||||
輸出電阻 Output resistance |
≤20 |
Ω |
|||||||
初級引腳尺寸 Size of primary pins |
□ 6.28 ×1.0 |
mm |
|||||||
電源電壓(Vc) Supply voltage |
+5±5% |
V |
|||||||
功耗電流 Power consumption |
≤15+Ip/Ns |
mA |
|||||||
參考電壓(Vref) Reference voltage |
+2.5±0.5%(Output) |
V |
|||||||
參考內接電阻 Vref internal resist resistor |
200 |
Ω |
|||||||
外接參考電壓范圍 Vref external range resistor |
2.0-2.8(Input) |
V |
|||||||
零點電壓 |
@ Ip=0 +2.5±0.5% |
V |
|||||||
失調電壓溫漂 Offset drift |
@ -40~+105℃≤±0.05 |
mV/℃ |
|||||||
輸出電壓溫漂 |
@ -40~+105℃≤±0.05 |
mV/℃ |
|||||||
線性度 Linearity |
@ Ip=0-±Ipn ≤0.1 |
%FS |
|||||||
總精度 Total accuracy |
≤±1.0 |
% |
|||||||
di/dt 跟隨精度 accurately followed |
>50 |
A/μS |
|||||||
響應時間 Response time |
@ Ip=Ipn, 50 A/μS,10%-90%<1.0 |
μS |
|||||||
寬帶 Bandwidth |
@ -1db DC~100 |
KHZ |
|||||||
絕緣電壓 Galvanic isolation |
@ 50HZ,AC,1min 3.0 |
KV |
使用說明 Directions for use |
1. 當待測電流從傳感器穿過,即可在輸出端測得電壓大小。(注意:錯誤的接線可能導致傳感器損壞)
When the current will be measured goes through a sensor,the voltage will be measured at the output end.
(Note:The false wiring may result in the damage of the sensor).
2. 可按用戶需求定制不同額定輸入電流和輸出電壓的傳感器。
Custom design in the different rated input current and the output voltage available.
|
l UL94-V0.
l EN60947-1:2004
l IEC60950-1:2001
l EN50178:1998
SJ 20790-2000
總體參數 General date |
|
數值 Value |
單位 Unit |
符號 Symbol |
工作溫度 Operating temperature |
-40 to +105 |
oC |
TA |
儲存溫度 Storage temperature |
-40 to +125 |
oC |
TS |
毛重(約)Mass(approx) |
12 |
g |
M |
特性圖Characteristics chart |
脈沖電流信號響應特性 抗脈沖電壓干擾特性
Pulse current signal response characteristicEffects of impulse noise
|
l 變頻調速系統
Variable speed drives
l 電焊機
Welding machine
l 通訊電源
Battery supplied applications
l 不間斷電源UPS
Uninterruptible Power Supplies (UPS)
l 電化學
Electrochemical
l 光伏產品
Solar inverters
結構參數 Mechanical dimension(for reference only) |
Remarks:
1. All dimensions are in mm.
2.General tolerance ±1mm.