霍爾傳感器
您現在的位置:首頁 > 產品世界 > 電量隔離變送器/傳感器 > 霍爾傳感器
LFB-B55電流傳感器
產品分類:霍爾傳感器
產品說明:LFB-B55系列閉環型電流傳感器的初、次級之間是絕緣的,用于測量直流、交流和脈沖電流。 The LFB-B55 Series current sensor is a...
全國咨詢熱線:
400-6618-389
- 功能特性
- 性能指標
- 型號說明
- 外形結構
- 接線與應用
LFB-B55系列閉環型電流傳感器的初、次級之間是絕緣的,用于測量直流、交流和脈沖電流。
The LFB-B55 Series current sensor is a closed loop device based on the measuring principle of the hall effect,with a galvanic isolation between primary and secondary circuit,it usesfor precision measurement of DC, AC and pulse current.
電參數 Electrical data(Ta=25℃±5℃) |
型號 Type |
LFB50B55 |
LFB100B55 |
LFB200B55 |
LFB300B55 |
LFB400B55 |
單位 Unit |
額定輸入電流(Ipn) |
50 |
100 |
200 |
300 |
400 |
A |
測量電流范圍(Ip) |
75 |
150 |
300 |
450 |
580 |
A |
匝 比 (Np/Ns) Turns ratio(Np/Ns) |
1:2000 |
1:2000 |
1:2000 |
1:3000 |
1:3000 |
T |
次級線圈電阻 Secondary resister |
25 |
25 |
25 |
46 |
46 |
Ω |
額定次級輸出電流 |
25 |
50 |
100 |
100 |
133.3 |
mA |
額定輸出電壓 Rated output |
5±0.5% |
V |
||||
電源電壓 Supply voltage |
±12~±15 |
V |
||||
功耗電流 Power consumption |
≤25+IpX(Np/Ns) |
mA |
||||
零點失調電壓 Zero voltage |
@Ip=0 ≤±15 |
mV |
||||
零點失調電壓溫漂 ZeroOffset drift |
@ -40~+85℃ ≤±0.5 |
mV/℃ |
||||
輸出電壓溫漂 Output drift |
@ -40~+85℃ ≤±0.25 |
mV/℃ |
||||
響應時間 Response time |
@100A/μS, 10%-90% <1.0 |
μs |
||||
線性度 Linearity |
@Ip=0-±Ipn ≤0.1 |
%FS |
||||
絕緣電壓 |
@ 50HZ,AC,1min 6 |
KV |
||||
di/dt跟隨精度 di/dt accurately followed |
>100 |
A/μs |
||||
帶寬 Bandwidth |
@ -3dbDC…150 |
KHz |
使用說明 Directions for use |
1. 產品箭頭的方向?yàn)?/span>Ip方向。
Is will be in a forward direction when the Ip flows according to the direction of the arrowhead.
2. 初級導體溫度不應超過100℃。
The primary conductor should be≤100℃.
3. 母排完全充滿初級穿孔時動態表現(di/dt和響應時間)為最佳。
The dynamic performance (di/dt and the response time)is the best when the primary hole is fully filled with the bus bar.
4. 為了達到最佳的磁耦合,初級線匝應繞在傳感器頂部。
The primary turns should be at the top of the sensor for the best magnetic coupling.
|
l UL94-V0.
l EN60947-1:2004
l IEC60950-1:2001
l EN50178:1998
SJ 20790-2000
總體參數 General date |
|
數值 Value |
單位 Unit |
符號 Symbol |
工作溫度 Operating temperature |
-40 to +85 |
oC |
TA |
儲存溫度 Storage temperature |
-40 to +125 |
oC |
TS |
毛重(約)Mass(approx) |
75
|
g |
M |
特性圖Characteristics chart |
脈沖電流信號響應特性 抗脈沖電壓干擾特性
Pulse current signal response characteristic Effects of impulse noise
應用 Applications |
l 變頻調速系統
Variable speed drives
l 電焊機
Welding machine
l 通訊電源
Battery supplied applications
l 不間斷電源UPS
Uninterruptible Power Supplies (UPS)
l 電化學
Electrochemical
結構參數 Mechanical dimension(for reference only) |
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm